LCD Controller Board

ARV-1300/ARV-1320/ARV-1350

Product Catalog
(Please press icon for complete product catalog)

Panel Selection Guide

(Please press icon for complete panel supporting list file)

ARV-13XX series are compact size A/D converter boards designed for most industrial or customized display devices. This controller board
can drive LCD panels from VGA (640 x 480) up to WSXGA (1680 x 1050) resolution in true color, one or two pixel/clk mode. The onboard
Genesis controller is a high quality A to D converter with excellent scaler feature, capable of converting analog RGB, DVI, and video
signals to required digital signals for a wide range of LCD panels including AUO, Innolux_CMO, BOE, KOE, Kyocera, Sharp, CPT, NEC, Toshiba, Samsung, and LG. ARV-13XX series provide complete signal input ports, including RGB, DVI, Composite, S-Video, and YPbPr. New additional light sensor port supports Spectrah SR-2901 light sensor board to do auto brightness control for display device.

- ARV-1300 (RGB, LVDS) / ARV-1302 (RGB, TTL)

- ARV-1320 (RGB, DVI, LVDS) / ARV-1322 (RGB, DVI, TTL)
- ARV-1350 (RGB, DVI, Composite, S-Video, YPbPr, LVDS) / ARV-1352 (RGB, DVI, Composite, S-Video, YPbPr, TTL)

6.5” / 8.4” LCD Panel	- AU_G057VN01 V0 - AU_B101AW06V1-H/W_0A - NEC_NL10276BC13-01/01C

10.4” LCD Panel	- AU_G104SN03-V1 - NEC_NL6448AC33-29 - Sharp_LQ104S1LG21/2A/61 - Toshiba_ LT104AC36200

12.1” LCD Panel	- AU_B121EW09 V2 - CMO_G121S1-L02 - NEC_NL10276BC24-21 - Sharp_LQ150X1LG91 - Toshiba_ LTA121C33SF

15” LCD Panel	- AU_G150XG01 V3 - CMO_G141I1-L01 - NEC_NL10276BC30-19 - Sharp_LQ150X1LW73

17” / 18” / 19” LCD Panel	- AU_G170EG01 V1 - AU_M185XW01 V2 -Samsung_LTM190ET01 - LG_LM190E03

Top

Genesis GM5766 AD/DD converter chip

Analog RGB input

High quality zoom (from VGA) and shrink (from SXGA) scaling

Support single pixel (24-bit) & double pixel (48-bit) TFT panels

Support resolutions from 640 x 480 up to 1680 x 1050

Support TTL single or dual channel LVDS interface

OSD on screen display

Top

ADC Controller

Genesis GM5766 ADC chip
High quality scaling engine
8-bit triple-channel ADC / PLL
Advanced color management
Complete OSD functions

Input Port

DB-15 analog VGA interface (All series)
Slim-Type Digital DVI (ARV-132X/135X only)
Mini Din S-Video Connector (ARV-135X only)
RCA Jack Composite Connector (ARV-135X only)
Slim-Type S-Video YC signal interface (ARV-135X only)
Slim-Type Composite signal interface (ARV-135X only)
Slim-Type Components for YPbPr signal (ARV-135X only)

On Screen Display (OSD)

Auto setup
Brightness / Contrast adjustment
ACC/ACM-II Color Enhancement & Contrast Adjustment
Image V-Position/ H-Position adjustment
Auto Color Reset/ Standard color Setup
Hue / Saturation/Color Temperature Adjustment

Panel Support

TFT VGA 640 x 480
TFT SVGA 800 x 600
TFT XGA 1024 x 768
TFT SXGA 1280 x 1024
TFT WXGA 1440 x 900
TFT SXGA+ 1400x1050
TFT WSXGA 1680 x 1050

Single 18-bit or Dual 48-bit/36-bit LVDS panels
Single 24-bit TTL panels

Image Processing Feature

Auto-detection (Input format detection)
Auto-configuration (Input positioning & clock phase)

Power In Support

LCD Panel: +3.3V, +5V, +12V
Backlight inverter: +3.3V, +5V, +12V

Image Scaling

Scale up / down a lower / higher resolution images to fit higher / lower resolution panels

Panel Connection

One 30-pin LVDS connector
One 40-pin TTL connector (ARV-13X2 only)

VESA Standard

Supports VESA DDC2B and a subset of VESA DPMS standards
On board EDID ROM compliant with VESA DDC2B 1.X (Optional)

Power Consumption

3.7 Watt (ARV-13XX board only without connection to LCD panel) (+12V DC input)

Power Requirement

Note: The complete power requirement is dependent on what LCD panel connected to ARV-13XX series. Around 60 Watt power adapter is recommended to supply +12V DC power for ARV-13XX series and LCD panels under 22” size. For more detail in power requirement, please contact Spectrah Customer Service Center for more information.

Board Dimension

100 (L) x 110 (W) mm

Weight

60g

Top